Replacing your Mira showerhead
Replacing a Mira shower head can sometimes lead to issues, particularly with compatibility and water flow. Problems can arise if the new head is not compatible with the existing hose or shower system, or if it has a different flow rate that doesn't suit the shower type. This can cause the showers to burn out completely, which means they will need to be replaced.
If you’re experiencing issues with your showerhead, it's worth trying some of these simple maintenance tips first to see if they solve your issue.
1. Use white vinegar for deep cleaning
-
Fill a plastic bag with white vinegar.
-
Submerge the showerhead (or the nozzle part) in the bag and secure it with a rubber band.
-
Let it soak for 1–8 hours (depending on buildup).
-
Remove the bag, run hot water, and scrub with an old toothbrush.
2. Scrub the nozzles
-
Use a soft toothbrush or a small scrub brush to clean around the rubber nozzles (especially on rainfall or handheld showerheads).
-
For stubborn buildup, dip the brush in baking soda before scrubbing.
3. Unclog spray holes
-
Use a toothpick, safety pin, or needle to gently poke into each spray hole if they’re clogged.
-
Be gentle to avoid damaging the nozzles.
If after trying these and you still haven't resolved your issue, it might be time for a new showerhead.
It’s really important that when replacing your Mira showerhead and hose, that you are doing so with a compatible product so please get in contact for us to arrange this for you. (Please note this will only apply if we are responsible for the repairs in your home)
If you need to arrange this, please raise a repair on My Abri by clicking on to the bathroom option, then shower and finally by selecting the 'Shower head is faulty or blocked' option.
Going forward, if you replace your showerhead yourself and it causes issues, you may be liable for the cost of the repair.
Return to News and Events